Fusion Stain and Finishing Oil is a concentrated blend of oils, pigments, and waxes that gives a rich, deep color to your wood projects, and requires no additional topcoat!  The level of color will depend on how many coats you apply, but can vary from a light transparent stain to a nearly opaque color.


This oil finish can also be used over Fusion Mineral Paint to achieve antiqued or washed finishes.


Pro tip:  Waxes can be applied over this product, but water-based topcoats (such as Fusion Tough Coat) should not be applied over any oil based product.



Fusion Stain and Finishing Oil - Natural - 237ml

  • Size: 237ml

    Coverage: 150-300 sq. ft per liter (38-75 sq. ft per can)

    Available in 6 colors.


    Application:  Apply a thin coat with an applicator pad or a brush, allowing it to evenly penetrate the wood's surface.  After 10-15 minutes wipe in the direction of the wood grain to remove excess and avoid pooling of the oil.


    Drying times:

    9 hours: Careful use.  Apply a second coat if necessary.  

    3 days: Normal Use

    10 days: Use of cleansing products for oiled surfaces.

* Free shipping promotion applies to Fusion Mineral Paint and products sold on this web site only.  DIY Paint is not included in our free shipping promotion due to the rules of our retailer agreement.

Chalk paint, Milk Paint, Mineral Paint, Metallic Paint, Furniture Waxes, & brushes for the DIY furniture painter

© 2020 Vintique Finishes. All rights reserved.